Flight Controls
| Description | Part# | Item Desc | Price |
FLIGHT CONTROLS |
|||
| A5281 | AA1/AA5 Inboard Elevator Bearing Support 902010-502 |
88.00 | |
| Comes with new 902013-1 bearing installed | |||
 |
A230 | Rudder Pedal Pivot Plug 601051-1 |
8.51 |
 |
5901005-2 | Drive Bolt, Flap Control Arm | 8.78 |
 |
601029-1 | Bushing C Rudder Bar/Flap Torque Tube All AA1, AA5 Series aircraft |
28.22 |
 |
A5135 | Flap Center Torque Tube 5604008-503 AA5A/5B |
|
| NO LONGER AVAILABLE NEW. WE DO HAVE SERVICEABLE USED ASSEMBLIES THAT HAVE BEEN INSTECTED TO FACTORY SPECS | |||
 |
|||
| 601053-2 | Rudder Return Spring AA1 - AG5B (2 per aircraft) | 8.26 | |
| These rudder springs should be replaced every 1000 hours in accordance with the maintenance manual. Keeping a spare in the aircraft can save a trip and headaches! | |||
 |
607012-1 | Roller, Elevator Trim Arm AA1 - AG5B |
24.06 |
| The rollers and bushings are used on several locations of the trim. Most cases, its not just one thing that is causing the play in your elevator trim, but a combination of several worn items. | |||
| 607012-2 | Bushing, Elevator Trim Arm AA1 - AG5B |
22.08 | |
| Discounts available to those that are replacing the trim arms at the same time. | |||
| ELEVATOR TRIM CONTROLS | |||
 |
A2150 | Trim Wheel Gear 607007-3 AA1 - AA5B |
14.25 |
| Most of our aircraft are well over 30 years old. Take the time and inspect these gears closely. | |||
 |
A2151 | Trim Pinion Gear (Undrilled) 607010-3 AA1 - AA5B |
14.95 |
 |
607004-502 | AA1 Series Bungee Housing Wear limit .016 as per AD 72.07.10 |
208.00 |
 |
A2160 | AA1 Bungee Guide Assembly 602110-2 |
28.85 |
 |
5302026-9 | '72-'75 AA5 and AA1C L/H Trim Arm | 88.01 |
| 5302026-10 | '72-'75 AA5 and AA1C R/H Trim Arm | 88.01 | |
| 302041-1 | AA1, AA1A, AA1B Trim arm | 64.70 | |
 |
5302026-15 | '75-'79 AA5A/AA5B L/H Trim Arm | 88.01 |
| 5302026-16 | '75-'79 AA5A/AA5B R/H Trim Arm | 88.01 | |
| These elevator trim arms should not be painted. | |||
 |
5302053-502 | AA5A/AA5B Actuator for Trim Screw | 147.12 |
 |
A2157 | 4LI-FF Nyliner Bearing For Flex Shaft at Trim Wheel |
1.15 |
 |
A2156 | AA5A/AA5B Yoke Trim bellcrank 5302053-503 |
|
 |
A2152 | Trim Flex Coupling 607010-2 | 29.58 |
 |
A5158 | Undrilled Control Sprocket 5603068-3 | 24.18 |
 |
A5159 | Undrilled Control Sprocket 5603068-1 | 24.00 |
| FLIGHT CONTROLS CONTROL COLUMN |
|||
 |
5603068-2 | Aileron Control Sprocket | 142.16 |
 |
A261 | AA1/AA5 series control wheel VERY LIMITED SUPPLY. ONCE THEY ARE GONE......THEY ARE GONE |
92.12 |
| SX1015 | Push To Talk Grips control wheel. Comes with 4 grips. Slips over control wheel yoke. Push to talk button in left grip on pilot side and push to talk button in right grip for co-pilot side. Easy to install. Dresses up chipped yokes. |
127.27 | |
 |
602113-1 | Steel Rivet to attach control wheel. NO LONGER AVAILABLE. Use clevis bolt (AN23-27) |
|
 |
A262 | Short Control Wheel Shaft With Horizontal hole 602109-1 |
28.70 |
 |
A264 | Bushing, Control column shaft For AA1, AA1A, AA1B(0001-0237) AA5(0001-0405) 602110-1 |
17.12 |
Assembled View - Disassembled View |
A265 | Control Column Bushing and “eyeball” swivel assembly-2 pieces AA1B(0238 and on) through AA1C’s AA5 (0406 and on) through AA5B. 602117-501 | 36.09 |
| NOTE: The ball is what generally wears fastest and not the race. The ball can be replaced by just removing the control wheel shaft and replacing the ball. | |||
| FLIGHT CONTROLS CONTROL COLUMN |
|||
 |
A266 | Lock Sleeve, pilot-side control Column shaft 602118-1 (4 rivet holes for mounting) |
15.80 |
| Can be a challange to replace unless you use a short cut. Ask Garner | |||
 |
A267 | Gust Lock All AA1's and AA5's 602111-501 |
16.65 |
| A268 | Sleeve for sprocket on control Column shaft 602104-3 |
||
 |
A569 | 'T' shape, AA5 series control column 5602102-501 |
|
 |
5602110-1 | Control Wheel Rubber cover/pad | 22.00 |
FLIGHT CONTROLS These are all FAA-PMA APPROVED REPLACEMENT BEARINGS |
A250 | Bronze/Teflon Bearing All AA1’s/AA5’s 902013-1 |
10.04 |
| A251 | Bronze/Teflon Bearing All AA1's/AA5's 902013-2 |
14.82 | |
| A252 | Bronze/Teflon Bearing All AA1's/AA5's 902013-3 |
14.78 | |
| A253 | Bronze/Teflon Bearing All AA1's/AA5's 902013-4 |
15.20 | |
FLIGHT CONTROLS The precision machined items in SK121A can be expensive, but the alternative can be alarming. The maximum allowable wall reduction on any control surface torque tube is .029 Once it gets past that, you will be faced with replacing the control surface. With the deminishing supply of serviceable used parts, these make a pretty good alternative. |
904003-2 | Oversize stainless Steel Sleeve | 42.08 |
| 904003-3 | Oversize Bearing | 32.40 | |
| 904003-5 | Oversize Shim | 4.53 | |
| 904003-4 | Oversize chamfered spacer | 24.66 | |
| FLIGHT CONTROLS CONTROL SURFACE TORQUE TUBE REPAIR AA1-AG5B SERIES AIRCRAFT UPPER RUDDER |
904003-1 | Oversize Stainless Steel Sleeve | 35.15 |
| 904003-3 | Oversize Bearing | 32.40 | |
| 904003-5 | Oversize Shim | 4.53 | |
| 904003-4 | Oversize chamfered spacer | 24.66 | |
| FLIGHT CONTROLS CONTROL SURFACE TORQUE TUBE REPAIR AA1-AG5B SERIES AIRCRAFT LOWER RUDDER |
904003-2 | Oversize stainless Steel Sleeve | 42.08 |
| 904003-3 | Oversize Bearing | 32.40 | |
| 904003-5 | Oversize Shim | 4.53 | |
| 904003-4 | Oversize chamfered spaceR | 24.66 | |
| FLIGHT CONTROLS CONTROL SURFACE TORQUE TUBE REPAIR AA1 THROUGH 1975 AA5 TRAVELER INBOARD OR OUTBOARD ELEVATOR |
904003-1 | Oversize stainless Steel Sleeve | 35.15 |
| 904003-3 | Oversize Bearing | 32.40 | |
| 904003-5 | Oversize Shim | 4.53 | |
| 904003-4 | Oversize chamfered spacer | 24.66 | |
| FLIGHT CONTROLS CONTROL SURFACE TORQUE TUBE REPAIR AA1 THROUGH 1975 AA5 TRAVELER INBOARD OR OUTBOARD ELEVATOR |
R C/609 SK121A |
Loctite Retaining Compound .34 fl oz Copy of Service Kit 121A |
16.80 5.00 |
| FLIGHT CONTROLS - FLAPS | A2120 | Flap Switch AA1's - GA7 | 83.42 |
| A2121 | Weather Boot for Flap Switch (keep the moisture out and prolong the life of your flap switch with this inexpensive boot. Way too simple to install) |
5.16 | |
| B204 | Flap Limit Switch | ||
| A5137 | 91.5' Flap Position Indicator Cable | 20.00 | |
| A1131 | Slip nut for AA1 flap clutch very limited supply |
9.33 | |
| A5135 | Flap Center Torque Tube AA5A/AA5B |
416.88 |
